humidity  (BioSpherix)

Journal: Industrial & Engineering Chemistry Research

Article Title: Harnessing Particle Size Segregation To Tune Molecular Additive Distribution in Coatings

doi: 10.1021/acs.iecr.5c04051

Figure Lengend Snippet: 3 μm × 3 μm AFM topography maps of the top surface of bimodal colloidal films formed at 25 °C and three different relative humidities: 10% (fast), 50% (medium), and 90% (slow). (a) Corresponds to the films without added NiPc, (b) 0.1 wt % NiPc, (c) 0.5 wt % NiPc, and (d) 1 wt % NiPc. Scale bars represent 1 μm.

Article Snippet: Then, 200 μL of the colloidal blends were cast on the coverslips using a micropipette and left to film form at 25 °C and three different relative humidities (10%, 50%, and 90%) inside an environmental chamber (HCP105, Memmert).

Techniques:

Journal: Industrial & Engineering Chemistry Research

Article Title: Harnessing Particle Size Segregation To Tune Molecular Additive Distribution in Coatings

doi: 10.1021/acs.iecr.5c04051

Figure Lengend Snippet: Cross sections of films formed from a binary mixture of large (ϕ L = 0.7) and small particles (ϕ S = 0.3) obtained by confocal fluorescence microscopy with different NiPC concentrations: (a) 0.1 wt %, (b) 0.5 wt %, and (c) 1 wt %. Bright horizontal intensity lines at the film’s top surface observed in samples dried under low and medium humidities indicate NiPc is located at the upper part of the film.

Article Snippet: Then, 200 μL of the colloidal blends were cast on the coverslips using a micropipette and left to film form at 25 °C and three different relative humidities (10%, 50%, and 90%) inside an environmental chamber (HCP105, Memmert).

Techniques: Fluorescence, Microscopy