Journal: Materials

Article Title: Simultaneous Necking and Barreling Deformation Behaviors in Bending of Single-Crystal Gold Micro-Cantilever

doi: 10.3390/ma17164054

Figure Lengend Snippet: ( a ) FIB fabrication steps of the micro-cantilever, ( b ) EBSD map along the x-axis, ( c ) inverse pole figure of A-TW10, ( d ) EBSD map along the x-axis, and ( e ) inverse pole figure of B-TW10.

Article Snippet: The Nilaco gold underwent heat treatment at 700 °C for 5 h. Following the heat treatment, the Nilaco gold was examined using an electron backscatter diffraction (EBSD) system (BRUKER QUANTAX CrystAlign EBSD system, Tokyo, Japan) equipped in a scanning electron microscope (SEM, S-4300SE, Hitachi Co., Ltd., Tokyo, Japan) to identify a target coarse grain for the fabrication of the sample B micro-cantilever.

Techniques:

Journal: Materials

Article Title: Simultaneous Necking and Barreling Deformation Behaviors in Bending of Single-Crystal Gold Micro-Cantilever

doi: 10.3390/ma17164054

Figure Lengend Snippet: Side views of A-TW10: ( a ) as-fabricated, ( b ) deformed, and ( c ) support. Top views of A-TW10: ( d ) as-fabricated, ( e ) deformed, and ( f ) support. ( g ) EBSD mapping of the deformed A-TW10.

Article Snippet: The Nilaco gold underwent heat treatment at 700 °C for 5 h. Following the heat treatment, the Nilaco gold was examined using an electron backscatter diffraction (EBSD) system (BRUKER QUANTAX CrystAlign EBSD system, Tokyo, Japan) equipped in a scanning electron microscope (SEM, S-4300SE, Hitachi Co., Ltd., Tokyo, Japan) to identify a target coarse grain for the fabrication of the sample B micro-cantilever.

Techniques:

Journal: Additive manufacturing

Article Title: Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V ☆

doi: 10.1016/j.addma.2021.102118

Figure Lengend Snippet: EBSD inverse pole figure maps (IPFs), along with generated α-Ti pole figures and IPF’s for the Random (top), Dehoff (middle), and Raster (bottom) scan strategies for 0–4 mm in build height. Clear evidence for columnar growth and lath structure is observed for the Raster specimen. All three scan strategies have similar α-Ti textures to neutron diffraction measurements. A small sharpening of orientations was observed for the Raster scan strategy, but is attributed to sampling statistics. Retained β-Ti can also be observed at the base of the Raster specimen in the red outlined region, due to enrichment with Fe and Cr from the stainless steel build plate. This was also present for the Random and Dehoff scan strategies, but was not captured via EBSD. All maps are colored with respect to the build direction.

Article Snippet: AC and JTB acknowledge the support of the National Institute of Standards and Technology, USA, US Department of Commerce, USA, in obtaining the large-scale EBSD and during data analysis.

Techniques: Generated, Sampling