Review



hybrid pixel array detector  (Xenocs Inc)


Bioz Verified Symbol Xenocs Inc is a verified supplier
Bioz Manufacturer Symbol Xenocs Inc manufactures this product  
  • Logo
  • About
  • News
  • Press Release
  • Partners
  • Contact
  • Bioz Stars
  • Bioz vStars
  • 97

    Structured Review

    Xenocs Inc hybrid pixel array detector
    Hybrid Pixel Array Detector, supplied by Xenocs Inc, used in various techniques. Bioz Stars score: 97/100, based on 2485 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/GeniX3D/pm42025403-170-16-21
    Average 97 stars, based on 2485 article reviews
    hybrid pixel array detector - by Bioz Stars, 2026-11
    97/100 stars

    Images

    Related Articles

    Small Angle X-ray Scattering:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Polymers:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    X-ray Scattering:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Rheology:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Polymer:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Shear:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Analysis:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Wide Angle X-ray Scattering:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Software:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Sample Prep:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Electron Microscopy:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Energy Dispersive X-Ray:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Spectroscopy:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Produced:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Microscopy:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Morphology:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.

    Scanning Electron Microscopy:

    Article Title: Programmable 4D printing of sustainable multifunctional photoresins with tissue-matched mechanics for interfacial tissue regeneration
    Article Snippet: ted over a 2θ range of 10°–90°, using a 0.6 mm fixed divergence slit. Small-angle X-ray scattering (SAXS) measurements of the printed polymers were performed at room temperature using a Xeuss 3.0 from Xenocs (USA) equipped with GeniX3D beam delivery system (Cu Kα high-intensity X-ray beam, wavelength λ = 1.5419 Å, 50 kV, 0.6 mA) and EIGER2 R 1 M DECTRIS detector (75 μm pixel size). Each sample was

    Article Title: Self-assembled systems of bile salts and nanocellulose particles
    Article Snippet: Samples were conditioned in glass capillary cells and sealed with resin.Samples were conditioned in glass capillary cells and sealed with resin.. SAXS measurements were performed using Xenocs Xeuss 2.0 equipment with the GeniX 3D X-ray source and copper targets (~ 5.4 keV), in addition to the Dectris Pilatus 300k detector, with q range of 0.02–0.71 Å− 1.. Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].Scattering spectra were corrected using empty-cell and water-buffered-cell readings, according to standard procedures to evaluate the intensity of the generated beam [47–49].

    Article Title: Zeolite-Templated Carbon with Tailored Mesoporosity as a Kinetic Enhancer for Bio-Based Hard Carbon Sodium-Ion Battery Anodes
    Article Snippet: https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).https://doi.org/10.3390/batteries12100385 SAXS measurements were carried out at SAXSLab Sapienza using a Xeuss 2.0 Q-Xoom instrument (Xenocs SAS, Grenoble, France).. The setup was equipped with a micro-focus Genix 3D X-ray source with a Cu anode (λ = 0.1542 nm), a two-dimensional Pilatus3 R 300K detector (DECTRIS Ltd., Baden-Dättwil, Switzerland) positioned at variable sampleto-detector distances, and an additional Pilatus3 R 100K detector (DECTRIS Ltd.) placed at a fixed shorter distance from the sample, approximately 14 cm, and tilted by 36◦ to cover higher scattering angles.. The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.The calibration of the sample-to-detector distance was performed using silver behenate for the small-angle range and Al2O3 for the fixed-distance wide-angle detector.



    Similar Products

    98
    Dectris AG eiger2 r cdte 1m hybrid pixel array detector
    Eiger2 R Cdte 1m Hybrid Pixel Array Detector, supplied by Dectris AG, used in various techniques. Bioz Stars score: 98/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/eiger2/pm42929618-201-32-31
    Average 98 stars, based on 1 article reviews
    eiger2 r cdte 1m hybrid pixel array detector - by Bioz Stars, 2026-11
    98/100 stars
      Buy from Supplier

    99
    Rigaku Corporation hybrid pixel hypix array detector
    Hybrid Pixel Hypix Array Detector, supplied by Rigaku Corporation, used in various techniques. Bioz Stars score: 99/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/HyPix-6000HE/pm42912258-186-19-1
    Average 99 stars, based on 1 article reviews
    hybrid pixel hypix array detector - by Bioz Stars, 2026-11
    99/100 stars
      Buy from Supplier

    95
    Agilent technologies diode array detector
    Diode Array Detector, supplied by Agilent technologies, used in various techniques. Bioz Stars score: 95/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/Bio+LC/10__29356_slash_jmcs__v70i1__2587-98-21-27
    Average 95 stars, based on 1 article reviews
    diode array detector - by Bioz Stars, 2026-11
    95/100 stars
      Buy from Supplier

    93
    HORIBA Ltd synapse linear ingaas arrays nir detector
    Synapse Linear Ingaas Arrays Nir Detector, supplied by HORIBA Ltd, used in various techniques. Bioz Stars score: 93/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/Synapse+InGaAs%2FSymphony+II+InGaAs/arxiv__2609__38045-161-17-6
    Average 93 stars, based on 1 article reviews
    synapse linear ingaas arrays nir detector - by Bioz Stars, 2026-11
    93/100 stars
      Buy from Supplier

    98
    Dectris AG pixel array detector
    Pixel Array Detector, supplied by Dectris AG, used in various techniques. Bioz Stars score: 98/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/eiger2/pmc13672795-135-15-20
    Average 98 stars, based on 1 article reviews
    pixel array detector - by Bioz Stars, 2026-11
    98/100 stars
      Buy from Supplier

    95
    Agilent technologies diode array matrix detector
    Diode Array Matrix Detector, supplied by Agilent technologies, used in various techniques. Bioz Stars score: 95/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/Bio+LC/10__1016_slash_j__jfca__2026__109492-73-13-18
    Average 95 stars, based on 1 article reviews
    diode array matrix detector - by Bioz Stars, 2026-11
    95/100 stars
      Buy from Supplier

    99
    Hitachi Ltd primaide hplcdad diode array detector
    Primaide Hplcdad Diode Array Detector, supplied by Hitachi Ltd, used in various techniques. Bioz Stars score: 99/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/Primaide/10__1038_slash_s41598___026___66444___x-247-13-12
    Average 99 stars, based on 1 article reviews
    primaide hplcdad diode array detector - by Bioz Stars, 2026-11
    99/100 stars
      Buy from Supplier

    98
    JASCO Inc photodiode array detector
    Photodiode Array Detector, supplied by JASCO Inc, used in various techniques. Bioz Stars score: 98/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/JASCO+UV+Visible+PDA+Detectors/10__1016_slash_j__electacta__2026__149651-101-29-16
    Average 98 stars, based on 1 article reviews
    photodiode array detector - by Bioz Stars, 2026-11
    98/100 stars
      Buy from Supplier

    98
    JASCO Inc photo diode array detector
    Photo Diode Array Detector, supplied by JASCO Inc, used in various techniques. Bioz Stars score: 98/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/array+detector/JASCO+UV+Visible+PDA+Detectors/pm42476277-84-2-6
    Average 98 stars, based on 1 article reviews
    photo diode array detector - by Bioz Stars, 2026-11
    98/100 stars
      Buy from Supplier

    Image Search Results